dsPIC33E/PIC24E USB Starter Kit User’s Guide
2.2
FEATURES
This section describes the key features of the starter kit. Refer to Figure 1-1 and
Figure 1-2 in Chapter 1. “Introduction” for their actual locations on the board.
2.2.1
Processor Support
The dsPIC33E USB Starter Kit is designed with a permanently mounted (i.e., soldered)
dsPIC33EP512MU810 DSC. Similarly, the PIC24E USB Starter Kit is designed with a
permanently mounted (i.e., soldered) PIC24EP512GU810 MCU.
2.2.2
Power Supply
There are two ways to supply power to the dsPIC33E or PIC24E USB Starter Kit:
? Connect the USB Debug connector J2 to a PC running MPLAB using the supplied
mini-B to full-sized A cable
? An external application board with a regulated DC power supply that provides +5V
can be connected to the application board connector (J3) that is provided on the
bottom side of the board
One green LED (D4) is provided to show that the dsPIC33E or PIC24E device is being
powered.
2.2.3
Debug USB Connectivity
The dsPIC33E or PIC24E USB Starter Kit includes a PIC24FJ256GB106 USB micro-
controller that provides debugger connectivity over USB. The PIC24FJ256GB106 is
hard-wired to the dsPIC33E or PIC24E device to translate the I/O pins of the
PIC24FJ256GB106 device to the ICSP? pins of the dsPIC33E or PIC24E device. The
debugger circuit also includes a 25LC256 Serial EEPROM device for data storage.
The programming/debugging circuit on the dsPIC33E or PIC24E USB Starter Kit is similar
in functionality and feature-set to the MPLAB PICkit? 3 debugger.
2.2.4
dsPIC33E/PIC24E USB Connectivity
There are three possible ways to connect to the dsPIC33E or PIC24E USB
microcontroller:
? Host mode
Connect the device to the type-A connector J6, located on the top side of the
starter kit. If using the debug USB port to power the Host port, install jumper J5 to
short the back-power prevention diode. Note that a maximum of ~400 mA can be
supplied from the debug USB port to the host port using this method. If the full
500 mA supply is needed for the application, an external supply must be
connected to the application board and jumper J5 must be removed to prevent
back-powering the debug USB port.
? Device mode
First, connect the debug mini-B USB cable to port J2. Next, connect the starter kit
to the USB Host using a cable with a type-B micro plug to the starter kit’s micro-B
port J4, located on the bottom side of the starter kit. The other end of the cable
must have a type-A plug. Connect it to a USB host. Jumper J5 should be
removed.
DS51936B-page 16
? 2010-2011 Microchip Technology Inc.
相关PDF资料
DM330013 MICROSTICK DSPIC33F/PIC24H BOARD
DNET1 SURGE SUPPRESSOR ETHERNET RJ45
DR-8094 RACK DOUBLE 84"X20.25"X36" BLK
DR-IAC5E INPUT MODULE AC 5VDC
DRIDC24A INPUT MODULE DC 34MA 24VDC
DRODC24 OUTPUT MODULE DC 13MA 24VDC
DRR-40A MODULE REDUNDANCY 40A DIN RAIL
DRS-1215 SURGE SUPPRSSR 15A 14OUT RACKMNT
相关代理商/技术参数
DM330013 功能描述:开发板和工具包 - PIC / DSPIC Microstick PIC24H and dsPIC33F RoHS:否 制造商:Microchip Technology 产品:Starter Kits 工具用于评估:chipKIT 核心:Uno32 接口类型: 工作电源电压:
DM330013 制造商:Microchip Technology Inc 功能描述:BOARD DEV EUROBOT MICROSTICK
DM330013 制造商:Microchip Technology Inc 功能描述:BOARD DEVELOPMENT MICROSTICK
DM330013-2 功能描述:开发板和工具包 - PIC / DSPIC Microstick II RoHS:否 制造商:Microchip Technology 产品:Starter Kits 工具用于评估:chipKIT 核心:Uno32 接口类型: 工作电源电压:
DM330014 功能描述:LED 照明开发工具 LED Lighting Dev Kit RoHS:否 制造商:Fairchild Semiconductor 产品:Evaluation Kits 用于:FL7732 核心: 电源电压:120V 系列: 封装:
DM330015 功能描述:开发板和工具包 - PIC / DSPIC Motor Ctrl Starter Kit mTouch Sensing RoHS:否 制造商:Microchip Technology 产品:Starter Kits 工具用于评估:chipKIT 核心:Uno32 接口类型: 工作电源电压:
DM330016 功能描述:BOARD AUDIO DEV DSPIC33E RoHS:是 类别:编程器,开发系统 >> 评估演示板和套件 系列:dsPIC™ 33E 标准包装:1 系列:- 主要目的:数字电位器 嵌入式:- 已用 IC / 零件:AD5258 主要属性:- 次要属性:- 已供物品:板 相关产品:AD5258BRMZ1-ND - IC POT DGTL I2C1K 64P 10MSOPAD5258BRMZ10-ND - IC POT DGTL I2C 10K 64P 10MSOPAD5258BRMZ100-ND - IC POT DGTL I2C 100K 64P 10MSOPAD5258BRMZ50-ND - IC POT DGTL I2C 50K 64P 10MSOPAD5258BRMZ1-R7-ND - IC POT DGTL I2C 1K 64P 10MSOPAD5258BRMZ10-R7-ND - IC POT DGTL I2C 10K 64P 10MSOPAD5258BRMZ50-R7-ND - IC POT DGTL I2C 50K 64P 10MSOPAD5258BRMZ100-R7-ND - IC POT DGTL I2C 100K 64P 10MSOP
DM330017 制造商:Microchip Technology 功能描述:MPLAB STARTER KIT FOR DIGITAL 制造商:Microchip Technology Inc 功能描述:MPLAB STARTER KIT FOR DIGITAL POWER - Boxed Product (Development Kits) 制造商:Microchip Technology Inc 功能描述:KIT MPLAB STARTER DIGITAL POWER 制造商:Microchip Technology Inc 功能描述:STARTER KIT MPLAB DSPIC33F 制造商:Microchip Technology Inc 功能描述:STARTER KIT, MPLAB, DSPIC33F, DC/DC 制造商:Microchip Technology Inc 功能描述:MPLAB Starter Kit for Digital Power Series 制造商:Microchip Technology Inc 功能描述:64KB Flash, 8KB RAM 16MIPS USBOTG Crypto 制造商:Microchip Technology Inc 功能描述:STARTER KIT, DSPIC33F DIGITAL POWER CONVERTER; Silicon Manufacturer:Microchip; Silicon Core Number:dsPIC33F; Kit Application Type:Power Management; Application Sub Type:Synchronous Buck-Boost Converter; Core Architecture:dsPIC 制造商:Microchip 功能描述:MPLAB Starter Kit for Digital Power Series